OAKLEY DESIGN FERRARI 458 ITALIA LIMITED EDITION | CUSTOM CARS
The Ferrari 458 Italia is one of the most beautiful cars currently being produced; however, British tuners Oakley Design decided to make it look even better. Thankfully, Oakley Design didn’t tinker too much with the 458 Italia’s looks.The Oakley Design Ferrari 458 Italia gets upgraded carbon fiber front spoiler lip, a light-weight carbon fiber rear diffuser, a new rear spoiler, carbon fiber mirrors and engine covers. The roof has also been covered in carbon fiber.Power has been increased by way of a revised ECU and a larger air intake box. The 458 Italia now produces 623 bhp compared to 570 bhp in the standard version. Torque has been increased to 423 lb-ft (573 Nm) from 398 lb-ft (540 Nm).Only seven Oakley Design Ferrari 458 Italia’s will be produced, that number has been increased by two due to high demand.
OAKLEY DESIGN FERRARI 458 ITALIA LIMITED EDITION PRESS RELEASE
Following international acclaim for their finely honed Porsche GT2, GT3 and Panamera conversions, Oakley Design is now proud to announce their tuning programme for the Ferrari 458 Italia | Oakley Design
OAKLEY DESIGN FERRARI 458 ITALIA Production limited originally to 5 has now been increased to 7 cars due to early demand and confirmed orders, with each bearing a unique build number plaque. Outside of this FERRARI 458 ITALIA model, individual parts will also be made available for clients who do not require the complete package.
There is also now a possibility of a Ducati 1198 superbike with ‘carbon edition’ design to compliment the sale of each car to make the ultimate Italian package complete.
With Jon Oakley’s motorsport background central to the company’s philosophy, any change, whether aerodynamic or mechanical, is only done for sound technical reasons.
Wind tunnel testing proved that the carbon-fibre front spoiler lip adds 25kg of downforce over the front axle at 150mph 240km/h, benefiting FERRARI 458 ITALIA's aerodynamics.
Further internal airflow management is seen in the radiator air exit ducts beside the headlamps, which receive carbon-fibre inserts and improved ducting from the radiators.
Deeper, wider side sills improve airflow control down the cars flanks, as well as helping to optimize the flat-bottom effect. The longer but 10kgs lighter carbon-fibre rear diffuser has deeper boundary layer fences to improve directional stability Of the FERRARI 458 ITALIA .
Finally, a new rear spoiler with Gurney flap adds 23kg of downforce over the rear axle at 150mph. This works together with the underbody diffuser to reduce the Italia’s overall drag by smoothing out the separating airflow.
The only exterior alterations made for cosmetic reasons are the signature Oakley Design carbon-fibre roof panel, mirror covers and engine cover insert below the rear window glass. These are matched in the engine bay by carbon-fibre panels covering the inner wings and rear bulkhead.
Lower kerb weight automatically improves performance and puts less stress on the suspension, tyres and brakes. The complete titanium exhaust system with triple outlet pipes and no bypass valve shaves a huge 32kg from the Italia’s aft section, where it counts the most.
At half the weight of cast alloy equivalents, the new lightweight Forged HRE wheels save a significant 5.0kg of unsprung weight per corner. Their adjusted offset keeps the wheel centre line the same as OE to compensate for the half-inch wider footprint at each corner.
OAKLEY DESIGN FERRARI 458 ITALIA will offer 9.0J x 20-inch and 11.0J x 20-inch wheels with 245/35ZR20 and 295/35ZR20 tyres, as well as one-inch diameter smaller 9.0J x 19-inch and 11.0J x 19-inch HRE Racing wheels shod with the New Pirelli Trofeo tyre in sizes 245/35/19 and 325/30/19 that meets the latest EU regulations for street legal trackday rubber.
Apart from lower back-pressure in the new exhaust system, the improved throttle response and output is down to the larger carbon-fibre air intake box, larger ram air feeds and larger diameter white silicon pipes with Oakley Design logos connecting the air boxes to the intake.
With an ECU remap OF THE FERRARI 458 ITALIA optimising the fuelling and ignition curves, these changes account for an approximate 10 percent power gain from 570bhp to 623bhp, while torque is up five percent from 540Nm to 573Nm
Carrying around 65kg less and with more power on tap, the factory 3.4 sec 0-100km/h time drops to 3.0sec, while top speed has been recorded at over 335km/h.
As reducing the sprung weight has the effect of stiffening the suspension, the car is undergoing extensive testing in this form. A bespoke suspension kit for hard-core trackday drivers is also underway at Intrax, Oakley Design’s suspension and development partner.
Oakley Design Ducati 1198 ‘carbon edition’ images.
www.oakleydesign.eujon@oakleydesign.eu
Keep informed on the latest and greatest in Grease n Gasoline by liking us on FACEBOOK, following us on TWITTER, watching us on YouTube , Stumbleupon our interests and discovering us on Pinterest ! news on concept cars , car news gasoline , diesel motorcycle, auto blog , autos , Motor sports , Motor sports , Motor sports, Motor sports ,transportation, fuel efficiency, motor sports, motorcycle accessories, aftermarket , travel, autos, automotive, cars, 2012, vehicles, vehicle, autoblog, auto, google, youtube, facebook , transportation , f1 sports carhybrid cars luxury cars electric vehiclescustom motorcyclesbikershand madehelmetwallpapers superbikes auto insurance car, insurance motorcycle insurance road safety traffic safety accidents first aid, suv, moto gp , motogp formula1, automakers,
amazon,
bing,
innovation,
green cars,
gmail,
hd,
linkedin
transportation
fuel efficiency
motor sports
cars
2012
vehicles
vehicle
autoblog
auto
google
youtube
facebook
f1
formula1
